Software Downloads

Software
Firmware
Protocols
Calibration Curves

Here you can find the most up-to-date version of the Speedy Breedy® Software.   Please find the download link at the bottom of this page.

 

Please note:

  • It is best practice to uninstall the previous version of the software. For instructions please click here
  • When you update the new software you MUST also ensure you have the latest firmware installed on your Speedy Breedy.

 

Once you have downloaded the file please follow the below instructions to update the Speedy Breedy Software:

  • Your internet browser might tell you that this type of file can harm your computer, as it is an executable (install) file. Please click on the arrow at the end of the box and then select "Keep" as in the image below.

  • Click to open the Speedy Breedy install file.

 

Again, because this is an executable file you have downloaded from the internet and not from a USB stick, your computer might warn you that this file is unsafe. This is merely an automatic precaution – please proceed anyway.

 

  • Click on "More info, followed by "Run anyway" to proceed with the installation.

  • Please allow Speedy Breedy to make changes to your computer i.e. install and click yes, as in the image below

  • The Setup wizard will open to guide you through the installation. Click on NEXT.
  • Please read the Bactest Terms and Conditions which includes the End User License Agreement and if you are happy click on I ACCEPT and then on NEXT.
  • The Bactest folder is automatically installed on the C drive, but if you would like to change the location please click on BROWSE and select a destination folder. If you are happy with the location please click on NEXT.
  • A Bactest and Speedy Breedy® folder is automatically created in the Start Menu if you wish to change the name or location please click on BROWSE, otherwise click on NEXT.
  • Please review the installation settings. If you are happy with them please click on INSTALL otherwise click on BACK to return to the previous screen.
  • The software is now being installed, this may take a few minutes.
  • When the installation process has finished successfully please click on FINISH to complete the software installation.
  • After the software installation has been completed the device driver installation wizard will open automatically to install the Speedy Breedy drivers.
  • Please click on NEXT. Installing the drivers should only take a few seconds.
  • Once it has completed please click on FINISH.
  • Please click on the Speedy Breedy icon on your desktop to open the software. The Speedy Breedy software is now ready to use.

 

Software V2.1.0.10 Download Link

 

If you have any problems or concerns, please contact Speedy Breedy support +44(0)1223 42 2312 or support@speedybreedy.com or alternatively contact your system administrator.

Here you can find the most up-to-date version of the Speedy Breedy Firmware.   Please find the download link at the bottom of this page.

 

When you have downloaded the file please complete the following instructions:

  • Open the .zip folder (see image below)

  • Shut down Speedy Breedy and insert the Speedy Breedy SD card into your PC.
  • Copy the "btsbfmwr.bin" file and paste to your Speedy Breedy SD card. (see images below)

  • Once you have added the firmware update file to the SD card, put the SD card back into the Speedy Breedy unit.
  • Turn Speedy Breedy unit on.
  • The display will show the following message: “Speedy Breedy booting…” followed by “Firmware update file found!”. Press the tick button to proceed.
  • The display will read “Try to update? >install”. Press the tick button to proceed.
  • The display will read “Updating system….” followed by “Update completed.”
  • Remove the update file from the SD card via your PC and put the SD card back into Speedy Breedy. Once the SD card has been replaced press the tick button.
  • Speedy Breedy will now reboot. After the reboot has completed, the Speedy Breedy can be used as normal.

 

Note: If you have not removed the update file from the SD card before rebooting, please turn Speedy Breedy off, remove the file and replace the SD card and turn it back on again. It is not recommended that the update file remains on the SD card, as there is a risk that it can corrupt other files on the SD-card.

 

Firmware V1.1.3.2 Download Link

 

If you have any problems or concerns, please contact Speedy Breedy support +44(0)1223 42 2312 or support@speedybreedy.com or alternatively contact your system administrator.

Please download protocols by clicking on the relevant links below.

ProtocolTesting ForCulture MediumConditions
021-1 General Contamination All 24hr V1.1Sterility, General ContaminationBAC021 - TSB36°C, 24 hours
022-1 Coliforms All 48hr V1.1ColiformsBAC022 - MCC36°C, 48 hours
022-2 E.Coli All 16hr V1.2E. coliBAC022 - MCC44°C, 16 hours
023-1 Pseudomonas aeruginosa 21hr V1.3Pseudomonas aeruginosaBAC023 - PSA36°C, 21 hours
026-1 Wild Yeast 96hr V1.1Wild YeastsBAC026 - WY25°C, 96 hours
027-1 All Yeast 96hr V1.1All YeastsBAC027 - AY25°C, 96 hours
028-1 Salmonella All 48hr V1.1Salmonella speciesBAC028 - SAL36°C, 48 hours
029-1 Listeria All 30hr V1.1Listeria speciesBAC029 - LIS36°C, 30 hours
030-1 Staphylococcus All 48hr V1.1Staphylococcus speciesBAC030 - STAPH36°C, 48 hours
032-1 Clostridium perfringens 48hr V1.1Clostridium perfringensBAC032 - CLP44°C, 48 hours
033-1 Lactic Acid All 72hr V1.1Lactic Acid BacteriaBAC033 - LAC25°C, 72 hours
034-1 Enterococci All 19hr V1.2EnterococcusBAC034 - M-ENT36°C, 19 hours
036-1 Campylobacter All 48hr V1.1CampylobactorBAC036 - CAMPY41°C, 48 hours

Once downloaded please unzip the protocol and save the ... .sbx file into your Bactest folder.

Please download Calibration Curves by clicking on the relevant links below.

Calibration CurvesTesting ForCulture MediumConditions
E.coliE.coli in Fresh waterBAC022 - MCC44°C, 16 hours
Pseudomonas aeruginosaPseudomonas aeruginosaBAC023 - PSA36°C, 21 hours
EnterococciEnterococcusBAC034 - M-ENT36°C, 19 hours